Wire
Rope
Size
(in.) |
S-421T
Stock No.
Complete
Assembly * |
S-421T
Weight
Each
(lbs.) |
S-421
TW
Stock No.
Wedge Only |
S-421TW
Weight
Each
(lbs.) |
| 3/8 |
1035000 |
3.18 |
1035555 |
.50 |
| 1/2 |
1035009 |
6.15 |
1035564 |
1.05 |
| 5/8 |
1035018 |
9.70 |
1035573 |
1.79 |
| 3/4 |
1035027 |
14.50 |
1035582 |
2.60 |
| 7/8 |
1035036 |
21.50 |
1035591 |
4.02 |
| 1 |
1035045 |
30.75 |
1035600 |
5.37 |
| 1-1/8 |
1035054 |
45.30 |
1035609 |
7.84 |
| **1-1/4 |
1040448 |
57.50 |
1040607 |
6.81 |
|
*
Terminator Assembly includes Socket, Wedge, Pin, and Wire
Rope Clip.
** 1-1/4" not available in TERMINATOR™
style.
Wedge
sockets meet the performance requirements of Federal Specification
RR-S550D, Type C, except those provisions required of the
contractor. |
|
|
S-421T
|
- Basket
is cast steel.
- Individually
magnetic particle inspected.
- Pin
diameter and jaw opening allows wedge and socket to be used
in conjunction with open swage and spelter sockets.
- Secures
the tail or “dead end” of the wire rope to the
wedge, thus eliminates loss or “Punch out” of
the wedge.
- Eliminates
the need for an extra piece of rope, and is easily installed.
- The
TERMINATOR ™ wedge eliminates the potential
breaking off of the tail due to fatigue.
- The
tail, which is secured by the base of the clip and the wedge,
is left undeformed and available for reuse.
- Incorporates
Crosby’s patented QUIC-CHECK® “Go”
and “No-Go” feature cast into the wedge. The proper
size rope is determined when the following criteria are
met:
|
- The
wire rope should pass thru the “Go” hole in
the wedge.
- The
wire rope should NOT pass thru the “No-Go” hole
in the wedge.
|
- Utilizes
standard Crosby Red-U-Bolt wire rope clip.
- Wedge
socket terminations have an effeciency rating of 80% based
on the catalog strength of XXIP wire rope.
- Standard
S-421 wedge socket can be retrofitted with the new style
TERMINATOR ™ wedge.
- Available
with Bolt, Nut, and Cotter Pin.
- U.S. patent
5,553,360 and foreign equivalents.
|
|
