[PRODUCTS PAGE, HOME]
Catalog provided courtesy of The Crosby Group, Inc.
Previous Page National Swage Fittings Next Page
Page 041

“COLD TUFF®” DUPLEX NON-TAPERED SLEEVE

 


S-506

  • For turnback wire rope splicing.
  • Designed for lower temperature toughness.
  • Resists cracking when swaged (equals or exceeds stainless steel sleeves).
  • Special processed low carbon steel.
  • “Cold Tuff ® ” for better swageability.
  • Stamp for identification after swaging without concern for fractures (as per directions in National Swaging Brochure).
  • Turnback terminations have efficiency ratings of 94% based on the catalog strength of wire rope.
NOTE:  S-506 Duplex sleeves are recommended for use with 6 x 19 or  6 x 37, IPS or XIP (EIP), RRL, FC or IWRC wire rope.

Before using any National Swage fitting with any other type lay, construction or grade of wire rope, it is recommended that the termination be destructive tested and documented to prove the adequacy of the assembly to be manufactured.

 

 

S-506  Steel Duplex Non-Tapered Sleeve Specifications Press/Die Data
Stock No. Rope Size (in.) Weight  per 100 Pcs.
(lbs.)		 Pkg. Qty. Before Swage Dimensions Max. After Swage
Dimensions
(in.)		 Die Desc. Stock No.
500 Ton
1000 Ton
1500 Ton
5  x 7
A B C D
1039334 5/16 17 200 1.25 1.06 .81 .19 .77 3/8 1st Stage 1192364
1039352 3/8 13 100 1.25 1.12 .81 .14 .77 3/8 1st Stage 1192364
1039370 7/16 31 50 1.63 1.41 1.02 .19 1.03 1/2 1st Stage 1192408
1039398 1/2 27 50 1.63 1.44 1.02 .16 1.03 1/2 1st Stage 1192408
1039414 9/16 63 25 2.25 1.72 1.23 .23 1.29 5/8 1st Stage 1192444
1039432 5/8 54 25 2.25 1.84 1.28 .20 1.29 5/8 1st Stage 1192444
1039450 3/4 91 10 2.63 2.16 1.52 .23 1.55 3/4 1st Stage 1192462
1039478 7/8 126 10 2.88 2.50 1.75 .27 1.80 7/8 1st Stage 1192480
1039496 1 187 10 3.06 2.84 2.00 .33 2.05 1  1st Stage 1192505
1039539 1-1/4 384 Bulk 4.06 3.50 2.50 .38 2.56 1-3/8 socket 1193025

 
Previous Page Copyright © 2003  The Crosby Group, Inc.  All rights reserved Next Page