Kennedy Wire Rope & Sling, Co.

National Hydraulic Swaging Machines

Page 043

National offers the highest quality and most complete line of Hydraulic Swaging Machines specifically designed to be used to swage fittings on wire rope.

3 Capacities to Fit your Requirements

	SEE APPLICATION AND WARNING INFORMATION
Para Español: www.thecrosbygroup.com		On Pages 54-55

500 tons
1000 tons
1500 tons

1500 Ton Hydraulic Swaging Machines
Approximate weight 34,500 lbs. Overall height 8 ft. 6 in.
Fast advance and retract speed.
Automatic slow, precision swaging speed.

The following features of National Hydraulic Swaging Machines offer a number of advantages for high production sling shops:

A dual hydraulic system which combines the use of high speed and low pressure to bring dies into position; and the low speed and high pressure necessary for ideal swaging control.

Adjustable tonnage control, so tonnage can be set to match die block Working Load Limit.

Four column wide stance which provides the operator ample working clearance between columns and a large area for in-process sling storage.

Vertical swage action which gives an equalized press on the fitting to produce uniform high quality.

Self locating spring locks snap the shoe-type dies into place for quick set-up and change.

The National four column wide stance Hydraulic Swaging Machines, each equipped with an up-acting ram, have two side cylinders for fast approach and return of the main ram. They come in three swaging capacities.

500 ton (4450 kN)
1000 ton (8900 kN)
1500 ton (13350 kN)

Swaging Machine Capacity Chart for
Swage Sleeves, Ferrules & Buttons

Hydraulic Swaging Machine Size	Swaging Method	Die Size (in.)	Largest Fitting Allowed to Be Swaged (in.)
Hydraulic Swaging Machine Size	Swaging Method	Die Size (in.)	S-505 Sleeve	S-506 Sleeve	S-510 Ferrules	S-409 Buttons
500 Ton	Full Die	2-1/2 x 5 Mark Series 4 x 7 5 x 7	1-1/2	1-1/4*	9/16*	7/8*
1000 Ton	Full Die	4 x 7 5 x 7	2-1/2	1-1/4*	9/16*	1-1/4*
1500 Ton	Full Die	5 x 7 6 x 12	3-1/2	1-1/4*	9/16*	1-1/4*
3000 Ton	Full Die	6 x 12	4-1/2*	1-1/4*	9/16*	1-1/4*

* Largest size fitting available.

NOTE: For special applications or conditions,
contact Crosby National at (501) 982-3112.

Swaging Machine Capacity Chart for
S-501 & S-502 Swage Sockets

Hydraulic Swaging Machine Size	Swaging Method	Die Size (in.)	Largest Fitting Allowed to be Swaged (in.)
500 Ton	Full Shank	2-1/2 x 5 Mark Series 4 x 7 5 x 7	3/4
500 Ton	Progressive	4 x 7 5 x 7	1-1/4
1000 Ton	Full Shank	4 x 7 5 x 7	1
1000 Ton	Progressive	4 x 7 5 x 7	1-1/2
1500 Ton	Full Shank	5 x 7 6 x 12	1-1/4
1500 Ton	Progressive	5 x 7 6 x 12	2
3000 Ton	Full Shank	6 x 12	2
3000 Ton	Progressive	6 x 12	2-1/2*

* Largest size fitting available.

[PRODUCTS PAGE, HOME]
Catalog provided courtesy of The Crosby Group, Inc.