[PRODUCTS PAGE, HOME]
Catalog provided courtesy of The Crosby Group, Inc.
Previous Page Crosby® COLD-TUFF® Fittings Next Page
Page 066


G-2130CT
G-2140CT

 BOLT TYPE ANCHOR SHACKLES
  • Working Load Limit permanently shown on every shackle.
  • Forged - Quenched and Tempered, with alloy bolt.
    - G-2130CT - Carbon Steel
    - G-2140CT - Alloy Steel
  • Type Approval and certification in accordance with DNV Specification 2.7-1 Offshore Containers and DNV rules for Lifting Appliances - Loose Gear.
  • Fatigue Rated (G-2130CT only).
  • All sizes are individually proof tested to 2.0 times the Working Load Limit.
  • Finish is Inorganic Zinc Primer or Hot Dipped Galvanized.
  • Individually Serialized with Certification.
  • Bow and Bolt are Certified to meet charpy impact testing of 31 ft-lbs. min. ave. at -4° F.
  • Individually Mag Inspected with certification.
Dnvlogo.jpg (2545 bytes)

G-2130CT
Bolt Type Anchor shackle with thin head bolt - nut with cotter pin. Meets the performance requirements of Federal Specification RR-C271D Type IVA, Grade A, Class 3, except for those provisions required of the contractor.

Nominal
Shackle
Size
(in.)		 Working
Load
Limit *
(tons)		 G-2130CT
Stock No.		 G-2130CT
Weight
Each
(lbs.)		 Dimensions
(in.)		 Tolerance
+/-
A B C D E F H L N P A C
3/4 4-3/4 1260568 2.72 1.25 .88 2.81 .75 2.00 1.81 4.97 3.50 .81 4.25 .06 .25
7/8 6-1/2 1260577 3.87 1.44 1.00 3.31 .88 2.28 2.09 5.83 4.03 .97 4.71 .06 .25
1 8-1/2 1260586 5.66 1.69 1.13 3.75 1.03 2.69 2.38 6.56 4.69 1.06 5.38 .06 .25
1-1/8 9-1/2 1260595 8.26 1.81 1.25 4.25 1.13 2.91 2.69 7.47 5.16 1.25 5.90 .06 .25
1-1/4 12 1260604 11.71 2.03 1.38 4.69 1.29 3.25 3.00 8.25 5.75 1.38 6.63 .06 .25
1-3/8 13-1/2 1260613 15.1 2.25 1.50 5.25 1.38 3.63 3.31 9.16 6.38 1.50 7.21 .13 .25
1-1/2 17 1260622 19.1 2.38 1.63 5.75 1.54 3.88 3.63 10.00 6.88 1.62 7.66 .13 .25
1-3/4 25 1260633 34.7 2.88 2.00 7.00 1.84 5.00 4.19 12.34 8.86 2.25 9.19 .13 .25

G-2140CT
G-2140 meets the performance requirements of Federal Specifications RR-C-271D, Type IVA, Grade B, Class 3 except for those provisions required of the ontractor.                                    
Nominal
Shackle
Size
(in.)		 Working
Load
Limit *
(tons)		 G-2140CT
Stock No.		 Weight
Each
(lbs.)		 Dimensions
(ins.)		 Tolerance
+/-
A B C D E F H L N P A C
1-1/2 30 1260801 20.8 2.38 1.63 5.75 1.54 3.88 3.63 10.00 6.88 1.62 7.66 .13 .25
1-3/4 40 1260812 33.9 2.88 2.00 7.00 1.84 5.00 4.19 12.34 8.86 2.25 9.19 .13 .25
2 55 1260823 52.0 3.25 2.25 7.75 2.08 5.75 4.81 13.68 9.97 2.40 10.16 .13 .25
2-1/2 85 1260834 96.0 4.12 2.75 10.50 2.72 7.25 5.69 17.84 12.87 3.12 12.94 .25 .25
3 120 1260843 178.0 5.00 3.25 13.00 3.11 7.88 6.50 21.50 14.36 3.62 16.50 .25 .25
3-1/2 150 1260852 265.0 5.25 3.75 14.63 3.62 9.00 8.00 24.62 16.50 4.12 19.00 .25 .25
4 175 1260861 338.0 5.50 4.25 14.5 4.10 10.00 9.00 25.69 18.42 4.56 19.75 .25 .25
4 3/4 † 200 1260870 450.0 7.25 4.75 15.62 4.50 11.00 10.50 29.25 21.00 6.00 20.50 .25 .25
5 † 250 1260889 600.0 8.50 5.00 20.00 4.50 13.00 12.00 35.00 24.50 6.50 21.97 .25 .25

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Load is 5.4 times the Working Load Limit.
4-3/4t-175ft, Minimum Ultimate Load is 5.4 times the Working Load Limit.
200t and larger, Minimum Ultimate Load is 4 times the Working Load Limit.  
† Furnished with Round Head Bolts with welded handle.            

Previous Page Copyright © 2003 The Crosby Group, Inc.  All rights reserved Next Page