[PRODUCTS PAGE, HOME]
Catalog provided courtesy of The Crosby Group, Inc.
Previous Page Crosby® Shank Hooks Next Page
Page 084
Sheave and Hook Configurator
 Sheave and Hook Configurator
          
  

 s319n.jpg (9637 bytes)

  s319.jpg (9200 bytes) Hoist hooks incorporate markings forges into the product which address two (2) QUIC-CHECK® features.

Deformation Indicators -- Two strategically placed marks, one just below the shank or eye and the other on the hook up, which allows for a QUIC-CHECK® measurement to determine if the throat opening has changed, thus indicating abuse or overload.

To check, use a measuring device (i.e. tape measure) to measure the distance between the marks.  The marks should align to either an inch or half-inch increment on the measuring device.  If the measurement does not meet this criteria, the hook should be inspected further for possible damage. Angle Indicators -- Indicates the maximum included angle which is allow between two (2) sling legs in the hook.  These indicators also provide the opportunity to approximate other included angles between two sling legs.

       
 

SEE APPLICATION AND WARNING INFORMATION
Para Español: www. thecrosbygroup.com On Pages 112-113
 

Patented trademark indicates QUIC-CHECK® product.

Hook I.D. Codes:  A - Alloy Steel, B - Bronze High Strength, C - Carbon Steel.
  

Working Load Limit*
(tons)		 Hook ID
Code		  Shank Hooks
Stock No		 Shank
Length ‡		 Weight
Each
(lbs.)		 Rep. Latch Kits
Carbon Alloy Bronze Carbon
S-319CN
 Alloy
S-319AN
 Bronze
S-319-BN

S-4320 Stock No.

 PL Stock
No.

SS-4055
Stock No.
3/4 1 .5 D †  1028505 1028701 1028900 Std. .50 1096325 — —
1  1-1/2 .6 F †  1028514 1028710 1028909 Std. .75 1096374 — —
1-1/2 2 1 G †  1028523 1028723 1028918 Std. 1.00 1096421 — —
2 3  1.4 H † 1028532 1028732 1028927 Std. 1.82 1096468 — —
3 5 2 I † 1028541 1028741 1028936 Std. 3.69 1096515 — —
5 7 3.5  J † 1028550 1028750 1028945 Std. 7.25 1096562 — —
7-1/2 11 5 K † 1028563 1028765 1028954 Std. 13.49 1096609 — —
10  15 6-1/2 L † 1028572  1028774 1028963 Std. 18.00 1096657 — —
15 22 10 N † 1028581 1028783 1028972 Std. 35.33 1096704 — —
20 30 — O 1024386 1024803 — Std. 72.00 — 1093716 1090161
20 30 — O 1024402 1024821 — Long 85.50 — 1093716 1090161
25 37 — P 1024420 1024849 — Std. 134.00 — 1093717 1090189
25 37 — P 1024448 1024867 — Long 172.00 — 1093717 1090189
30 45 — S 1024466 1024885 — Std. 182.00 — 1093718 1090189
30 45 — S 1024484 1024901 — Long 214.00 — 1093718 1090189
40 60 — T 1024509 1024929 — Std. 268.00 — 1093719 1090205
40 60 — T 1024545 1024965 — Long 312.00 — 1093719 1090205
50 75 — U 1024563 1024983 — Std. 390.00 — 1093720 —
50 75 — U 1024581 1025009 — Long 426.00 — 1093720 —
— 100 — W — 1025027 — Std. 610.00 — 1093721 —
— 100 — W — 1025045 — Long 675.00 — 1093721 —
— 150 —  X — 1025063 — Std. 735.00 — 1093721 —
— 200 — Y — 1025081 — Std. 1020.00 — 1093723 —
— 300 — Z — 1025090 — Std. 1390.00 — 1093724 —
*

NOTE: Proof load is 2 times Working Load Limit.
All carbon hooks designed with a 5/1 design factor.
All alloy and bronze hooks designed with a 4/1 design factor.
   

† New 319N Style Hook.
‡ See column "Y" on following page for actual length.
Previous Page Copyright © 2003 The Crosby Group, Inc.  All rights reserved Next Page