 |
Crosby®
Swivel Hooks
|
 |
Page
088 |
|
 |
 |
|
 |
SEE
APPLICATION AND
WARNING INFORMATION
On Page112-113 |
|
|
|
|
|
|
|
|
S-322CN/S-322AN |
- Forged - Quenched and Tempered.
- Proper design, careful forging, and precision controlled
quench and tempering gives maximum strength without excessive weight
and bulk.
- Every Crosby Swivel hoist hook has a pre-drilled cam
which can be equipped with a latch. Simply purchase the latch assemblies
listed and shown on pages 89-91.
Even years after purchase of the original hook, latch assemblies can
be added.
- Load rating codes stamped on each hook. 322 Swivel
Hooks use the same load rating code as 319 Shank Hooks, see page 84
for proper Hook Identification Codes.
- Hoist hooks incorporate markings forged into the product
which address two (2) QUIC-CHECK® features:
- Deformation Indicators -- Two strategically placed
marks, one just below the shank or eye and the other on the hook
tip, which allows for a QUIC-CHECK® measurement
to determine if the throat opening has changed, thus indicating
abuse or overload.
- Angle Indicators - Indicates the maximum included
angle which is allowed between two (2) sling legs in the hook. These
indicators also provide the opportunity to approximate other included
angles between two slings legs.
|
 |
 |
This hook
is a positioning device and is not intended to rotate under load. For swivel
hooks designed to rotate
under load, see page 94, 101, 106-110. Use in salt water requires shank
and nut inspection in accordance with
A.S.M.E. B30.10-1.2.1(b)(2)(c) 1996. |
- U.S. Patents 5,381,650 & 5,193,480 & 5,103,755
and foreign equivalents.
|
| Working
Load
Limit
(t)*
|
S-322CN
Stock No. |
S-322AN
Stock No.
|
Weight
Each
(lbs.) |
Dimensions
(in.) |
|
| Carbon |
Alloy |
A |
B |
C |
D |
F |
G |
H |
J |
K |
L |
M |
O |
R |
S |
AA |
3/4 |
1 |
1048600 |
1048804 |
.75 |
2.00 |
.82 |
1.25 |
2.86 |
1.25 |
.73 |
.81 |
.93 |
.63 |
5.66 |
.63 |
.93 |
4.55 |
.38 |
1.50 |
1096325 |
1 |
1-1/2 |
1048609 |
1048813 |
1.25 |
2.50 |
1.31 |
1.50 |
3.15 |
1.38 |
.84 |
.94 |
.97 |
.71 |
6.71 |
.71 |
.97 |
5.37 |
.50 |
2.00 |
1096374 |
1-1/2 |
2 |
1048618 |
1048822 |
2.25 |
3.00 |
1.50 |
1.75 |
3.59 |
1.50 |
1.00 |
1.16 |
1.06 |
.88 |
7.75 |
.88 |
1.06 |
6.12 |
.63 |
2.00 |
1096421 |
2 |
3 |
1048627 |
1048831 |
2.30 |
3.00 |
1.50 |
1.75 |
4.00 |
1.62 |
1.13 |
1.31 |
1.19 |
.94 |
8.25 |
.94 |
1.16 |
6.50 |
.63 |
2.00 |
1096468 |
3 |
5 |
1048636 |
1048837 |
4.96 |
3.50 |
1.64 |
2.00 |
4.84 |
2.00 |
1.44 |
1.63 |
1.50 |
1.31 |
9.69 |
1.13 |
1.41 |
7.50 |
.75 |
2.50 |
1096515 |
5 |
7 |
1048645 |
1048854 |
10.29 |
4.56 |
2.29 |
2.50 |
6.28 |
2.50 |
1.81 |
2.06 |
1.78 |
1.66 |
12.47 |
1.44 |
1.69 |
9.63 |
1.00 |
3.00 |
1096562 |
7-1/2 |
11 |
1048654 |
1048865 |
16.18 |
5.00 |
2.53 |
2.75 |
7.54 |
3.00 |
2.25 |
2.63 |
2.41 |
1.88 |
14.75 |
1.63 |
2.22 |
11.37 |
1.13 |
4.00 |
1096609 |
10 |
15 |
1048663 |
1048877 |
23.25 |
5.62 |
2.48 |
3.12 |
8.34 |
3.25 |
2.59 |
2.94 |
2.62 |
2.19 |
16.40 |
1.94 |
2.41 |
12.25 |
1.25 |
4.00 |
1096657 |
15 |
22 |
1048672 |
1048886 |
47.00 |
7.10 |
3.76 |
4.10 |
10.34 |
4.25 |
3.00 |
3.50 |
3.41 |
2.69 |
21.34 |
2.38 |
3.19 |
16.71 |
1.50 |
5.00 |
1096704 |
— |
30 |
— |
1025688 |
70.50 |
7.10 |
3.76 |
4.10 |
13.62 |
5.00 |
3.61 |
4.63 |
4.00 |
3.00 |
23.25 |
3.00 |
3.25 |
18.01 |
1.50 |
6.50 |
1093716 |
NOTE: Carbon swivel hooks .75tC-15tC: proofload is 2 times
working load limit. Designed with a 5 to 1 design factor.
Alloy swivel hooks 1.5tA-22tA: proofload is 2.5 times
the working load limit. Designed with a 4 to 1 design factor.
Alloy swivel hooks 30tA: proofload is 2 times
working load limit. Designed with a 4 to 1 design factor.
Dimensions for hooks 3/4 ton carbon thru 22
ton alloy are for S-4320 latch kits. Dimensions for hooks 30 ton alloy
are for PL
latch kit. 322C- Carbon Steel 322A
- Hook and Bail - Alloy Steel. |
| |
|
|
|
|
|
|
|
Copyright
© 2003. The Crosby Group, Inc. All
Rights Reserved
|
|
|
|
|
|
