[PRODUCTS PAGE, HOME]
[PRODUCTS PAGE, HOME] |
|
| Catalog provided courtesy of The Crosby Group, Inc. | |
 |
Golden Gate® Hooks |  |
| Page 092 | ||
HOOK CONNECTORS |
| The 6 connector styles shown below make it possible for Crosby to furnish a Golden Gate Hook to fit almost any make or model of hoisting equipment including | American Engineering Lo-Hed, ARO, Coffing, Electro Lift, Ingersoll-Rand, P & H, Robbins and Myers, Shepard Niles, CM, Shaw-Box, Wright, Yale & Towne. |
| CLOSED SWIVEL BAIL For use where hoisting line or shackle can be inserted into the bail. Hook sizes: 1 through 14
Style C — with self-closing gate. |
SHANK-TYPE HOOK
(Standard Length) For use on existing load blocks, with standard shank length. Hook sizes: 2 through 14
Style D — with self-closing gate. |
SHANK-TYPE HOOK
(Long Length) For use on existing load blocks requiring extra shank length. Hook: sizes: 4 through 17
Style K — with self-closing gate. |
| UNIVERSAL TYPE Open swivel bail for attachment to link chain. Hook sizes: 3, 4 and 5
Style E — with self-closing gate. |
LINK CHAIN NEST With ball-bearing swivel; attaches to chain by an alloy pin. Hook sizes: 4, 5 and 7
Style O — with self-closing gate. |
ROLLER CHAIN NEST Attachment with ball-bearing swivel and full-floating connector. Hook sizes: 4, 5 and 6
Style S — with self-closing gate. |
Letter designations shown
beneath each illustration above indicate BOTH connector style and
gate type. Each connector
is available with
either a self-closing or manual-closing gate. (e.g.: A size 4 hook with
a closed swivel bail connector and
self-closing gate is 4-C; with manual-closing gate, it is 4-A.)
|
Copyright © 2003 The Crosby Group, Inc. All rights reserved |  |
