[PRODUCTS PAGE, HOME]
Catalog provided courtesy of The Crosby Group, Inc.
Previous Page Crosby® Forged Swivels Next Page
Page 111

401, 402 and 403 swivels are positioning devices and are not intended to rotate under load.  For load swivels
see pages 106-110. 





CHAIN SWIVELS

Hot dip Galvanized
Quenched & Tempered

Meets the performance requirements RR-C-271D, Type VII, Class 1, except for those provisions required of the contractor.
Size
( in.)		 G-401
Stock No.
Galv.		 Working
Load
Limit *
(lbs.)		 Weight
Each
(lbs.)		 Dimensions
 A B C D E G J M R U V
1/4 1016233 850 .13 1.25 .69 .75 .62 1.12 .25 .69 .31 2.25 1.69 1.25
5/16 1016251 1250 .25 .25 1.63 .81 1.00 .75 1.38 .31 .81 2.72 2.06 1.47
3/8 1016279 2500 .54 2.00 .94 1.25 1.00 1.75 .38 1.00 .50 3.44 2.50 1.88
1/2 1016297 3600 1.12 2.50 1.31 1.50 1.25 2.25 .50 1.31 .63 4.25 3.19 2.44
5/8 1016313 5200 2.09 3.00 1.56 1.75 1.50 2.75 .62 1.50 .75 5.13 3.88 2.94
3/4 1016331 7200 3.09 3.50 1.75 2.00 1.75 3.25 .75 1.88 .88 5.78 4.94 3.46
* Ultimate Load is 5 times the Working Load Limit.

Hot dip Galvanized
Quenched & Tempered

Meets the performance requirements of Federal Specifications RR-C-271D, Type VII, Class2, except for those provisions
required of the contractor. 

   

 

REGULAR SWIVELS
Size
(in.)		 G-402
Stock No.
Galv.		 Working
Load
Limit*
(lbs.)		 Weight
Each
(lbs.)		 Dimensions
(in.)
A  B C D J M R S
1/4   1016019  850 .21  1.25 .69 .75 1.06 .69 .31 2.94 1.69
5/16 1016037 1250 .39 1.63 .81 1.00 1.25 .81 .38 3.56 2.06
3/8  1016055 2250 .71 2.00 .94 1.25 1.50 1.00 .50 4.31 2.50
1/2 1016073 3600 1.32 2.50 1.31 1.50 2.00 1.31 .63 5.44 3.19
5/8 1016091 5200 2.49 3.00 1.56 1.75 2.38 1.50 .75 6.56 3.88
3/4 1016117 7200 4.02 3.50 1.75 2.00 2.63 1.88 .88 7.19 4.31
7/8 1016135 10000 6.25 4.00 2.06 2.25 3.06 2.13 1.00 8.38 5.00
1 1016153 12500 8.95 4.50 2.31 2.50 3.50 2.38 1.13 9.63 5.75
1-1/4 1016199 18000 16.37 5.63 2.69 3.13 3.69 3.00 1.63 11.44 6.75
1-1/2 1016215 45200 45.79 7.00 4.19 4.00 4.19 4.00 2.25 17.13 10.00
* Ultimate Load is 5 times the Working Load Limit.

JAW END SWIVELS

Size
(in.)		 G-403
Stock No.
Galv.		 Working
Load
Limit*
(lbs.)		 Weight
Each
(lbs.)		 Dimensions
(in.)
A  B C G J K L M N  P R U V
1/4   1016395  850 .21 1.25 .69 .75 .69 .69 .47 1.03 .31 .88 .25 2.63 1.69 1.69
5/16 1016411 1250 .34 1.63 .81 1.00 .81 .81 .50 1.13 .38 .88 .31 2.94 2.06 1.81
3/8  1016439 2250 .66 2.00 .94 1.25 1.00 1.00 .63 1.41 .50 1.06 .38 3.63 2.50 2.25
1/2 1016457 3600 1.34 2.50 1.31 1.50 1.31 1.31 .75 1.75 .63 1.31 .50 4.50 3.19 2.88
5/8 1016475 5200 2.48 3.00 1.56 1.75 1.63 1.50 .94 2.06 .75 1.50 .63 5.31 3.88 3.44
3/4 1016493 7200 3.88 3.50 1.75 2.00 1.88 1.88 1.13 2.53 .88 1.75 .75 6.06 4.31 4.00
7/8 1016518 10000 5.87 4.00 2.06 2.25 2.13 2.13 1.19 2.75 1.00 2.06 .88 7.00 5.00 4.53
1 1016536 12500 9.84 4.50 2.31 2.50 2.63 2.38 1.75 3.72 1.13 2.81 1.13 8.56 5.75 5.94
1-1/4 1016572 18000 15.75 5.69 2.69 3.13 3.13 3.00 2.06 4.31 1.63 2.81 1.38 9.75 7.06 6.38
1-1/2 1016590 45200 54.75 7.00 4.19 4.00 5.63 4.00 2.88 6.00 2.25 4.44 2.25 14.74 10.00 10.84
* Ultimate Load is 5 times the Working Load Limit.
U.S. Patent 5,381,650 and foreign equivalents.

Hot Dip galvanized
Quenched & Tempered

Meets the performance
requirements of Federal
Specifications RR-C-271D,
Type VII, Class 3, except for those
provisions required of the contractor.
Previous Page Copyright © 2003  The Crosby Group, Inc.  All rights reserved Next Page