[PRODUCTS PAGE, HOME]
Catalog provided courtesy of The Crosby Group, Inc.
Previous Page
 Wire Rope Thimbles Next Page
Page 126
STANDARD WIRE ROPE THIMBLES
  • The standard choice for light duty applications and loading conditions.
  • Hot Dip galvanized Steel.

G-411 meets the performance requirements of Federal Specification FF-T-276b Type II, except for those provisions required of the contractor. 

  
Rope
Dia.
(in.)		 G-411
Stock No.
Galv.		 Weight
Per 100
(lbs.)		 Dimensions
(in.)
A B C D E F G H
1/8  1037256 3.50 1.94 1.31 1.06 .69 .25 .16 .05 .13
3/16 1037274 3.50 1.94 1.31 1.06 .69 .31 .22 .05 .13
1/4 1037292 3.50 1.94 1.31 1.06 .69 .38 .28 .05 .13
5/16 1037318 4.00 2.13 1.50 1.25 .81 .44 .34 .05 .13
3/8 1037336 6.70 2.38 1.63 1.47 .94 .53 .41 .06 .16
1/2 1037354 12.50 2.75 1.88 1.75 1.13 .69 .53 .08 .19
5/8 1037372 34.50 3.50 2.25 2.38 1.38 .91 .66 .13 .34
3/4 1037390 47.10 3.75 2.50 2.69 1.63 1.08 .78 .14 .34
7/8 1037416 84.60 5.00 3.50 3.19 1.88 1.27 .94 .16 .44
1 1037434 97.50 5.69 4.25 3.75 2.50 1.39 1.06 .16 .41
1-1/8 - 1-1/4 1037452 175.00 6.25 4.50 4.31 2.75 1.75 1.31 .22 .50
EXTRA HEAVY
WIRE ROPE THIMBLES
  • Greater protection against wear and deformation of the wire rope eye.
  • Longer service life.
  • Available in Hot Dip galvanized or Stainless Steel.
  • Stainless steel recommneded for more corrosive environments where greater protection is required.
G-414 meets the performance requirements of Federal Specification FF-T-276b Type III, except for those provisions required of the contractor. 
Rope
Dia.
(in.)		  Stock No. Weight
Per 100
(lbs.) 		 Dimensions
(in.) 
G-414
Galv.		 SS-414
Stainless 		 A B C D E F G H
* 1/4 1037639 1037960 6.50 2.19 1.63 1.50 .88 .44 .28 .06 .23
* 5/16 1037657 1037988 11.80 2.50 1.88 1.81 1.06 .55 .34 .08 .28
* 3/8 1037675 1038004 21.60 2.88 2.13 2.13 1.13 .66 .41 .11 .34
* 7/16 1037693 -- 34.70 3.25 2.38 2.38 1.25 .74 .47 .13 .38
* 1/2 - 9/16 1037719 1038022 51.00 3.63 2.75 2.75 1.50 .92 .53 .14 .41
* 5/8 1037755 1038040 75.70 4.25 3.25 3.13 1.75 1.03 .66 .16 .50
* 3/4 1037773 1038068 158.10 5.00 3.75 3.81 2.00 1.30 .78 .22 .66
7/8 1037791 -- 177.80 5.50 4.25 4.25 2.25 1.47 .94 .22 .75
1 1037817 -- 313.90 6.13 4.50 4.94 2.50 1.75 1.06 .25 .88
1-1/8 - 1-1/4 1037835 -- 400.00 7.00 5.13 5.88 2.88 1.94 1.31 .25 1.13
1-1/4 - 1-3/8 1037853 -- 811.00 9.06 6.50 6.81 3.50 2.35 1.44 .38 1.13
1-3/8 - 1-1/2 1037871 -- 1294.80 9.00 6.25 7.13 3.50 2.78 1.56 .50 1.13
1-5/8 1037899 -- 1700.00 11.25 8.00 8.13 4.00 3.02 1.72 .50 1.38
1-3/4 1037915 -- 1775.00 12.19 9.00 8.50 4.50 3.06 1.84 .50 1.31
1-7/8 - 2 1037933 -- 2775.00  15.13 12.00 10.38 6.00 3.38 2.09 .50 1.50
2-1/4 1037951 -- 3950.00 17.13 14.00 11.88 7.00 3.87 2.38 .63 1.63
* SS-414 sizes available in stainless steel type 304
Previous Page Copyright © 2003  The Crosby Group, Inc.  All rights reserved Next Page