Kennedy Wire Rope & Sling, Co.


A-342		A-345

	Alloy Steel — Quenched and Tempered. Individually proof tested to values shown with certification unless otherwise noted. Proof test certification shipped with each link. Sizes from 1/2" to 2" are drop forged.

"A" Size (in.)	A-342 Stock No.	Working Load Limit (lbs.)*	Weight Each (lbs.)	Proof Load (lbs.)	Dimensions (in.)
"A" Size (in.)	A-342 Stock No.	Working Load Limit (lbs.)*	Weight Each (lbs.)	Proof Load (lbs.)	B	C	Deformation Indicator
1/2	1014262	7000	.82	14000	2.50	5.00	3.00
5/8	1014280	9000	1.52	18000	3.00	6.00	3.50
3/4	1014306	12300	2.07	28400	2.75	5.50	3.50
7/8	1014315	15000	3.40	30000	3.75	6.38	4.50
1	1014324	24360	4.85	48700	3.50	7.00	4.50
1-1/4	1014342	36200	9.57	72400	4.38	8.75	5.50
1-1/2	1014360	54300	16.22	113200	5.25	10.50	6.50
1-3/4	1014388	84900	25.22	169800	6.00	12.00	7.50
2	1014404	102600	37.04	205200	7.00	14.00	9.00
††2-1/4	1014422	143100	54.10	289200	8.00	16.00	-
††2-1/2	1014468	160000	67.75	320000	8.00	16.00	-
††2-3/4	1014440	216900	87.70	433800	9.50	16.00	-
†† 3	1014486	228000	115.00	456000	9.00	18.00	-
††3-1/4	1014501	262200	145.00	524400	10.00	20.00	-
††3-1/2	1014529	279000	200.00	558000	12.00	24.00	-
††3-3/4	1015051	336000	198.00	672000	10.00	20.00	-
†† 4	1015060	373000	228.00	746000	10.00	20.00	-
††4-1/4	1015067	354000	302.00	708000	12.00	24.00	-
††4-1/2	1015079	360000	345.00	720000	14.00	28.00	-
††4-3/4	1015088	389000	436.00	778000	14.00	28.00	-
††5	1015094	395000	516.00	790000	15.00	30.00	-

* Minimum Ultimate Load is 5 times Working Load Limit. Based on single leg sling (in-line load), or resultant load on multiple legs with an included angle less than or equal to 120�.
** Proof test load equals or exceeds the requirement of ASTM A952(8.1) and ASME B30.9-1.4 for the chain size and number of legs.
†† Welded Master Link.

For use with chain slings, see page 166.

A-345 Master Link Assembly

Alloy Steel - Quenched and Tempered
Individually proof tested at 2 times Working Load Limit with certification.
Proof test certification shipped with each link.

"A" Size (in.)	A-345 Stock No.	Working Load Limit* † (lbs.)		Weight Each (lbs.)	Dimensions (in.)
"A" Size (in.)	A-345 Stock No.	Based on Grade 8 Chain Rating	Based on 5:1 Design Factor	Weight Each (lbs.)	B	C	D	E	F	G	Deformation Indicator	Flat Size
3/4	1014734	9100	12300	2.60	2.75	5.50	.56	3.35	1.57	.30	3.50	1/4"-5/16", 8mm
1	1014752	18400	24360	6.10	3.50	7.00	.69	3.94	2.36	.33	4.50	3/8", 10mm
1-1/4	1014770	31200	36200	13.20	4.38	8.75	.88	3.94	2.36	.53	5.50	1/2", 13mm
1-1/2	1014798	47000	54300	24.20	5.25	10.50	1.13	5.91	2.76	.65	6.50	5/8", 16mm
1-3/4	1014814	73500	84900	35.60	6.00	12.00	1.25	6.30	3.54	.73	7.50	3/4", 20mm
2	1014832	88900	102600	57.30	7.00	14.00	1.50	7.09	3.94	-	9.00	No Flat

* Ultimate Load is 5 times the Working Load Limit. Based on 60 degree included angle or smaller. For included angles greater than 60 degrees, the Working Load Limit must be de-rated. Refer to pages 165 for proper chain selection for triple and quadruple leg slings.

[PRODUCTS PAGE, HOME]
Catalog provided courtesy of The Crosby Group, Inc.

	Alloy Master Links
Page 128