HG-228
JAW & JAW

Meets the performance
requirements of Federal
Specifications FF-T-791b,
Type 1, Form 1 — CLASS 7,
except for those provisions
required of the contractor.

• Hot Dip galvanized steel.
• End fittings are Quenched and Tempered, bodies heat treated by normalizing.
• TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.
• Forged jaw ends are fitted with bolts and nuts for 1/4" through 5/8", and pins and cotters on 3/4" through 2-3/4" sizes.
• Modified UNJ thread on end fittings for improved fatigue properties.
  Body has UNC threads.
• Lock Nuts available for all sizes (see page 153).
• Comprehensive end fitting data provided on page 151.
• Fatigue Rated.

Thread
Diameter
& Take Up
(in.)

Stock No.
Galv.

Working
Load Limit *
(lbs.)

Weight
Each
(lbs.)

Dimensions
(in.)

A

B

E
Closed

G

J
Open

K
Closed

M
Open

N
Closed

BB

1/4 x 4

1032493

500

.36

.25

.45

1.58

.62

10.90

6.90

11.90

7.90

4.00

5/16 x 4-1/2

1032518

800

.52

.31

.50

1.98

.87

12.36

8.36

13.90

9.40

4.50

3/8 x 6

1032536

1200

.81

.38

.54

2.12

.87

16.14

10.14

17.38

11.38

6.00

1/2 x 6

1032554

2200

1.56

.50

.55

2.75

1.06

18.50

11.50

20.00

13.00

6.00

1/2 x 9

1032572

2200

1.74

.50

.55

2.75

1.06

24.50

14.50

26.00

16.00

9.00

1/2 x 12

1032590

2200

2.40

.50

.55

2.75

1.06

30.50

17.50

32.00

19.00

12.00

5/8 x 6

1032616

3500

2.72

.63

.82

3.50

1.31

20.05

12.80

22.13

14.88

6.00

5/8 x 9

1032634

3500

3.43

.63

.82

3.50

1.31

26.05

15.80

28.13

17.88

9.00

5/8 x 12

1032652

3500

3.91

.63

.82

3.50

1.31

32.05

18.80

34.13

20.88

12.00

3/4 x 6

1032670

5200

4.11

.75

1.03

4.18

1.50

21.50

14.00

24.10

16.60

6.00

3/4 x 9

1032698

5200

5.46

.75

1.03

4.18

1.50

27.50

17.00

30.10

19.60

9.00

3/4 x 12

1032714

5200

6.56

.75

1.03

4.18

1.50

33.50

20.00

36.10

22.60

12.00

3/4 x 18

1032732

5200

8.03

.75

1.03

4.18

1.50

45.50

26.00

48.10

28.60

18.00

7/8 x 12

1032750

7200

8.17

.88

1.23

4.85

1.75

35.11

21.36

38.07

24.32

12.00

7/8 x 18

1032778

7200

10.78

.88

1.23

4.85

1.75

47.11

27.36

50.07

30.32

18.00

1 x 6

1032796

10000

10.18

1.00

1.31

5.53

2.06

24.72

16.72

28.06

20.06

6.00

1 x 12

1032812

10000

12.20

1.00

1.31

5.53

2.06

36.72

22.72

40.06

26.06

12.00

1 x 18

1032830

10000

15.14

1.00

1.31

5.53

2.06

48.72

28.72

52.06

32.06

18.00

1 x 24

1032858

10000

18.08

1.00

1.31

5.53

2.06

60.72

34.72

64.06

38.06

24.00

1-1/4 x 12

1032876

15200

20.59

1.25

1.86

7.21

2.81

39.84

25.34

44.04

29.54

12.00

1-1/4 x 18

1032894

15200

24.68

1.25

1.86

7.21

2.81

51.84

31.34

56.04

35.54

18.00

1-1/4 x 24

1032910

15200

28.20

1.25

1.86

7.21

2.81

63.84

37.34

68.04

41.54

24.00

1-1/2 x 12

1032938

21400

30.69

1.50

2.25

7.88

2.81

41.50

26.50

46.50

31.50

12.00

1-1/2 x 18

1032956

21400

36.75

1.50

2.25

7.88

2.81

53.50

32.50

58.50

37.50

18.00

1-1/2 x 24

1032974

21400

41.60

1.50

2.25

7.88

2.81

65.50

38.50

70.50

43.50

24.00

1-3/4 x 18

1033018

28000

54.00

1.75

2.60

9.40

3.38

53.38

35.38

59.18

41.18

18.00

1-3/4 x 24

1033036

28000

63.36

1.75

2.60

9.40

3.38

65.38

41.38

71.18

47.18

24.00

2 x 24

1033054

37000

94.25

2.00

2.62

11.86

3.69

69.54

45.54

76.72

52.72

24.00

2-1/2 x 24

1033072

60000

165.00

2.50

3.06

13.56

4.44

72.98

48.98

82.18

58.18

24.00

2-3/4 x 24

1033090

75000

198.00

2.75

3.68

15.22

4.19

74.75

50.75

85.50

61.50

24.00