- The most complete line
of Eye hoist hooks.
- Each hook has a Product
Identification Code (PIC) for material traceability, along with
the size and the Crosby & U.S.A. in raised letters.
- Meets ASTM A-952-96
and proposed Euronorm standards for Grade 80 chain fittings.
- Suitable for use with
Grade 80 chain in overhead lifting applications as long as hook
is Proof Tested as part of the chain sling assembly or as an
individual component. Per ANSI B30.9-1.
- Forged Alloy Steel -
Quenched and Tempered.
- Engineered Flat for
use with S-325A coupler link (thru 5/8").
- QUIC-CHECK®
Hoist hooks incorporate two types of strategically placed markings
forged into the product which address two (2) QUIC-CHECK®
features:
- Deformation Indicators
- Angle Indicators
(see page 173 for detailed definition).
- Fatigue rated at 1-1/2
times the Working Load Limit at 20,000 cycles.
|
- "Look for the color
Gold - Crosby Alloy Products."
- Can be proof tested
to 2-1/2 times the Working Load Limit (4:1).
- Low profile hook tip.
- Working Load Limit for
Wire Rope forged on raised lettering pad to allow user to grind
off quickly and easily without affecting hook.
- Crosby recommends
grinding the Working Load Limit (which is for a 5 to
1 Design Factor) off the hook when using with Grade
80 chain.
|
- New integrated latch
(S-4320) meets the World class standard for lifting. See
page 89.
- Heavy duty stamped
latch interlocks with the hook tip.
- High cycle,
long life spring.
- When secured
with proper cotter pin through the hole in the tip of
hook, meets the intent of OSHA Rule 1926.550 (g) for
personnel lifting.
|
|
