HOW TO ASSEMBLE A LOK-A-LOY^® 8 CONNECTING LINK
Crosby Spectrum 8 Chain Slings are easy to assemble; the only tool required is a hammer.

1. Place the locking sleeve between the assembled half link forgings.

2. Drive the pin through the assembled link ends and sleeve until the end of the pin is flush with the outside of the connecting link halves

HOW TO ASSEMBLE A CROSBY CLEVIS TYPE HOOK

1. Place chain link into clevis slot of hook. Insert pin fully into the clevis ears.

2. Place the hook on its side and using a hammer, drive the locking pin into the clevis ear until it is flush with the outside surface.

HOW TO ASSEMBLE AN S-325/S-1325 COUPLER LINK

1. Slide Coupler Link over Engineered Flat of Master Link

2. Rotate Coupler Link so that clevis fitting is to the outside of Master Link and attach to chain sling.