 |
Crosby®
Eye Hooks
|
 |
Page
087 |
|
 |
 |
 |
 |
SEE
APPLICATION AND
WARNING INFORMATION
On Page112-113 |
|
|
|
 |
|
|
S-320
& S-320N
EYE HOOKS |
- Hoist hooks incorporate markings forged into the product
which address two (2)
QUIC-CHECK® features.
|
|
|
|
- Deformation Indicators - Two strategically placed marks,
one just below the shank or eye and the other on the hook up, which
allows for a QUIC-CHECK® measurement to determine
if the throat opening has changed, thus indicating abuse or overload.
- To check, use a measuring device (i.e. tape measure)
to measure the distance between the marks. The marks should align to
either an inch or half-inch increment on the measuring device. If the
measurement does not meet this criteria, the hook should be inspected
further for possible damage.
- Angle Indicators - Indicates the maximum included angle
which is allowed between two (2) sling legs in the hook. These indicators
also provide the opportunity to approximate other included angles between
two sling legs.
|
|
|
|
|
|
|
|
| Hook
ID
Code * |
Dimensions
(in.) |
| C |
D |
F |
G |
J |
K |
M |
N |
O |
Q |
T |
AA |
D |
3.34 |
2.83 |
1.25 |
.73 |
.90 |
.63 |
.63 |
.36 |
.89 |
.75 |
.87 |
1.50 |
F |
3.81 |
3.11 |
1.38 |
.84 |
.93 |
.71 |
.71 |
.42 |
.91 |
.91 |
.98 |
2.00 |
G |
4.14 |
3.53 |
1.50 |
1.00 |
1.00 |
.88 |
.88 |
.55 |
1.00 |
1.13 |
1.03 |
3.00 |
H |
4.69 |
3.97 |
1.63 |
1.13 |
1.13 |
.94 |
.94 |
.58 |
1.09 |
1.25 |
1.16 |
2.00 |
I |
5.77 |
4.81 |
2.00 |
1.44 |
1.47 |
1.31 |
1.31 |
.72 |
1.36 |
1.56 |
1.53 |
2.50 |
J |
7.37 |
6.27 |
2.50 |
1.81 |
1.75 |
1.66 |
1.66 |
.90 |
1.61 |
2.00 |
1.96 |
3.00 |
K |
9.07 |
7.45 |
3.00 |
2.25 |
2.29 |
1.88 |
1.63 |
1.11 |
2.08 |
2.44 |
2.47 |
4.00 |
L |
10.08 |
8.30 |
3.25 |
2.59 |
2.50 |
2.19 |
1.94 |
1.27 |
2.27 |
2.84 |
2.62 |
4.00 |
N |
12.53 |
10.30 |
4.25 |
3.00 |
3.30 |
2.69 |
2.38 |
1.56 |
3.02 |
3.50 |
2.83 |
5.00 |
O |
14.06 |
13.62 |
5.00 |
3.62 |
4.00 |
3.00 |
3.00 |
1.75 |
3.25 |
3.50 |
3.44 |
6.50 |
P |
18.19 |
14.06 |
5.38 |
4.56 |
4.25 |
4.00 |
3.19 |
2.00 |
3.00 |
4.50 |
3.88 |
7.00 |
S |
20.12 |
15.44 |
6.00 |
5.06 |
4.75 |
4.50 |
3.25 |
2.18 |
3.38 |
4.94 |
4.75 |
8.00 |
T |
23.72 |
18.50 |
7.00 |
6.00 |
5.75 |
5.50 |
3.91 |
2.53 |
4.12 |
5.69 |
5.69 |
10.00 |
|
| * Eye Hooks
(3/4 TC - 22TA), Proof load is 2.5 times Working Load Limit. Eye Hooks
(20T - 60TA), Proof Load is 2 times Working Load Limit. All carbon hooks-average
straightening loads (ultimate load) is 5 times Working Load Limit. Alloy
eye hooks 1 ton through 22 tons-average straightening load (ultimate load)
is 5 times Working Load Limit. Alloy eye hooks 30 tons through 60 tons-average
straightening load (ultimate load) is 4.5 times Working Load Limit. |
|
|
|
Copyright
© 2003. The Crosby Group, Inc. All
Rights Reserved
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
