[PRODUCTS PAGE, HOME]
Catalog provided courtesy of The Crosby Group, Inc.
Previous Page
 Crosby® Alloy Bolt Type Shackles Next Page
Page 064
NOTICE:  All 2140 shackles 200 tons and larger are magnetic particle inspected.  Certification available on special request.

G-2140 and S-2140
G-2140 meets the performance requirements of Federal Specification RR-C-271D,  Type IVA, Grade B, Class 3, except for those provisions required of the contractor.
  • Working Load Limit is permanently shown on every shackle.
  • Alloy bows, Alloy bolts.
  • Quenched and Tempered.
  • All sizes are individually proof tested to 2.0 times the Working Load Limit.
  • Shackles 200 metric tons and larger are provided as follows.
    • Non Destructive Tested
    • Serialized Pin and Bow
    • Material Certification (Chemical)
    • Certification must be requested at time of order.
  • Forged Alloy Steel 30 thru 175 metric tons. Cast Alloy Steel 200 thru 400 metric tons.
  • Pins are galvanized and painted red.

 

Nominal Shackle Size
(in.)		 Working Load Limit *
(t)		 Stock No. Weight Each (lbs.) Dimensions
(in.)		 Tolerance
G-2140
Galv.		 S-2140
S.C.		 A B C D E F G H J K L A E
1-1/2 30 1021110 1021129 20.8 2.38 3.62 1.62 1.63 5.75 1.39 6.88 7.75 10.00 3.88 1.54 .13 .25
1-3/4 40 1021138 1021147 33.9 2.88 4.19 2.25 2.00 7.00 1.75 8.86 9.06 12.34 5.00 1.84 .13 .25
2 55 1021156 1021165 52.0 3.25 4.81 2.40 2.25 7.75 2.00 9.97 10.41 13.68 5.75 2.08 .13 .25
2-1/2 85 1021174 1021183 96.0 4.12 5.69 3.12 2.75 10.50 2.62 12.87 13.56 17.84 7.25 2.71 .25 .25
3 120 1021192 — 178.0 5.00 6.50 3.62 3.25 13.00 3.00 14.36 16.50 21.50 7.88 3.11 .25 .25
3-1/2 150 1021218 — 265.0 5.25 8.00 4.12 3.75 14.63 3.75 16.50 19.00 24.62 9.00 3.62 .25 .25
4 175 1021236 — 338.0 5.50 9.00 4.56 4.25 14.50 4.00 18.42 19.75 25.69 10.00 4.10 .25 .25
4-3/4 ** † 200 1021414 — 450.0 7.25 10.50 6.00 4.75 15.62 3.75 21.00 20.50 29.25 11.00 4.50 .25 .25
5 ** † 250 1021432 — 600.0 8.50 12.00 6.50 5.00 20.00 3.88 24.50 21.97 35.00 13.00 4.50 .25 .25
6 ** † 300 1021450 — 775.0 8.38 12.00 6.75 6.00 19.50 4.75 25.00 24.35 35.25 13.00 5.00 .25 .25
7 ** † 400 1021478 — 1102.0 8.25 14.00 7.25 7.00 22.50 6.50 26.00 27.97 40.25 13.00 6.00 .25 .25

*     Note: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Load is 4 times the Working Load Limit on  200 thru 400 metric Tons.  For sizes 30 thru 175 metric Tons, Minimum Ultimate Load is 5.4 times the Working Load Limit.
**   Cast Alloy Steel.
†    Furnished with Round Head Bolts with welded handle.

Previous Page Copyright © 2003  The Crosby Group, Inc.  All rights reserved Next Page