Recommended
Application Chart |
Application |
Use |
Comments |
Web Slings, connect to Pad Eye,
Eye Bolt, or Lifting Lug. |
S-281 Sling Saver
Web Sling Shackle |
|
Always
Insure
Rated
Working
Load
Limits are
greater
than the
load
placed on
the fitting. |
Round Sling, connect to Pad Eye,
Eye Bolt, or Lifting Lug |
S-253 or S-252 Sling Saver
Shackle |
|
| Connect two S-252 or S-253 Sling Saver shackles
together |
S-256 Link Plate |
|
To keep the load centered on the
Pin, thus keeping the sling positioned correctly in the shackle
bow. |
S-255 Spool |
|
Web Slings or Round Slings
connecting to Master Links, Rings, or Crosby 320N Eye Hooks. |
S-280 Sling Saver Web Connector
with spool |
|
Web Slings or Round Slings
connecting to Grade 8 Chain. |
S-282 Sling Saver Chain Connector
with spool |
|
| High Strength, High Capacity Round Slings |
WS-320A Web Sling Hook |
|
| Choking with Web Slings or Round Slings |
S-287 Sliding Choker Hook |
|
| Master Links or Master Link Assembly to be sewn
into eye of Web Sling or attached utilizing web connector. |
Welded Master Link A-344 and Master Link Assembly
A-347. |
|
| Web Sling being used to lift die blocks, or other
equipment where standard Hoist Rings are used. |
HR-125 W |
|
Crosby Sling Saver hardware meets the
requirements for minimum stock diameter or thickness and effective
contact
width shown in the recommended standard specification for synthetic
Polyester Roundslings by the Web Sling
and Tie Down Association. WSTDA-RS1 (revised 2001). |
