Kennedy Wire Rope & Sling, Co.

	SEE APPLICATION AND WARNING INFORMATION
Para Español: www. thecrosbygroup.com		On Pages 114-115

STANDARD
LENGTH
SHANK HOOKS

For use on existing load blocks requiring extra shank length.
No.'s 2 through 12 style hooks are threaded approximately 80% of shank length.
- BL-D - with Self-Closing Gate
- BL-B - with Manual Closing Gate

Hook Size	BL-D Stock No.	BL-B Stock No.	Gate Type	Working Load Limit (Tons)*	Weight Each (lbs.)	Dimensions (in.)
Hook Size	BL-D Stock No.	BL-B Stock No.	Gate Type	Working Load Limit (Tons)*	Weight Each (lbs.)	A	B	C	D	E	F	G	H	I	J	SD	SL	ST
2	1050606	1050408	PIN-LOK	1.00	1.1	4.12	3.00	.93	.16	.97	1.25	2.88	.81	.75	.56	.50	.91	.59
3	1050617	1050419	PIN-LOK	1.40	1.3	4.50	3.31	.94	.22	1.06	1.38	3.19	.94	.84	.63	.56	1.25	.75
4	1050628	1050430	PIN-LOK	1.70	1.7	4.88	3.63	1.00	.22	1.13	1.50	3.63	1.16	1.00	.75	.63	1.31	1.19
5	1050639	1050441	ROLLOX	2.30	2.5	5.63	4.12	1.23	.25	1.25	1.64	4.09	1.31	1.12	.84	.75	1.31	1.00
6	1050650	1050452	ROLLOX	4.00	3.5	6.23	4.70	1.25	.25	1.39	1.64	4.56	1.57	1.34	.97	.88	1.69	1.16
7	1050661	1050463	ROLLOX	4.20	5.2	6.61	5.21	1.12	.25	1.50	2.00	4.94	1.63	1.44	1.13	1.00	1.81	1.38
8	1050672	1050474	ROLLOX	5.50	7.1	7.17	5.80	1.06	.28	1.75	2.25	5.84	2.00	1.65	1.23	1.13	2.06	1.50
9	1050683	1050485	ROLLOX	7.20	9.5	7.85	6.45	1.06	.31	1.88	2.50	6.50	2.06	1.81	1.38	1.25	2.44	1.81
11 †	1050694	1050496	TIP-LOK	9.20	15.6	9.62	8.00	1.25	.31	2.25	3.00	7.56	2.63	2.25	1.62	1.50	2.69	1.88
12 †	1050705	1050507	TIP-LOK	12.30	21.0	10.53	8.84	1.25	.38	2.50	3.25	8.69	2.94	2.59	1.94	1.63	2.88	2.13
13 †	1050716	1050518	TIP-LOK	15.00	30.0	11.23	9.54	1.25	.38	3.00	3.75	9.63	3.28	2.75	1.94	1.75	3.50	2.20
14 †	1050727	1050529	TIP-LOK	18.50	40.0	12.60	10.75	1.41	.38	3.38	4.25	11.00	3.50	2.97	2.38	2.00	3.75	2.38

* Ultimate Load is 4 times the Working Load Limit.
† Requires a drawing indicating the hook's exact shank diameter, shank length, thread length and throat opening requirements. If a drawing is not available, complete side 1 of a Crosby/Bullard HOOK DATA FORM on Page 333
Hook No.'s 2 through 12 are threaded approximately 80% of the shank length.

[PRODUCTS PAGE, HOME]
Catalog provided courtesy of The Crosby Group, Inc.

	Crosby^®/ Bullard^® Golden Gate^® Hooks
	Page 96