[PRODUCTS PAGE, HOME]
Catalog provided courtesy of KULKONI, INC  
Prev
Next
Contents
Index
KULKONI, INC.

 
ROTATION RESISTANT WIRE ROPE
 
These wire ropes are specially designed for use when rotation must be kept to a minimum. Strict adherence to breaking-in procedures and proper handling during use are extremely important with these ropes. Refer to the sources listed on page 60 for important information on rotation resistant wire ropes.
 
 8 x 19 CLASS, BRIGHT - Rotation Resistant, Steel Core (IWRC)
According to Federal Specification RR-W-410D.  Meets the  performance requirements of API-9A, and proposed A.S.T.M. National Standard on Wire Rope for General Purposes, as applicable. IWRC, bright, preformed, EIPS.
 Diameter    in     Inches     Extra Improved Plow Steel
Approx. Weight per Foot in Pounds Breaking Strength in Tons*
1/2
.47
11.6
9/16
.60
14.7
5/8
.73
18.1
3/4
1.02
24.0
7/8
1.06
25.9
1
1.44
35.0





8 X 25 SPIN RESISTANT
WITH IWRC
19 x 7 CLASS, BRIGHT - Rotation Resistant   

Sizes 1/2" and up meet the performance requirements of API-9A.  All sizes listed meet proposed A.S.T.M. National Standard on Wire Rope for General Purposes, as applicable.  WSC, EIPS.

Diameter
in
Inches
Extra Improved Plow Steel
Approx.
Weight per
foot in
Pounds
Breaking
Strength in
Tons*
3/8
.25
6.15
7/16
.35
8.33
1/2
.45
10.80
9/16
.58
13.60
5/8
.71
16.80
3/4
1.02
24.00
7/8
1.39
32.50
1
1.82
42.20
1.1/8
2.30
53.10
1.1/4
2.84
65.10

   

        19 x 7 ROTATION RESISTANT
WITH WIRE STRAND


*These strengths apply only when a test is conducted with both ends fixed.  When in use, these ropes' strengths will be reduced if one end is free to rotate.

Recommended working load not to exceed 1/5 of breaking strengths shown above for 8x19 and 19x7 ropes.

Note:  Rotation resistant ropes shown on this page have been produced by domestic manufacturers other than American Wire Rope Company.

WR999
Prev
Next
75
Contents
Index