Hand-splice or mechanical splice grommets.

Grommets either have a wire rope body or a body made up of six strands which are laid helically around a strand core. Either a hand-splice or a mechanical splice then forms an endless sling body. The minimum circumference of the sling is 96 times the grommet’s body diameter.

Rope-laid grommets are also available.
Consult our Fabricated Products Engineering Department for further information.

*Rated Capacities Basket Hitch and vertical lift based on D/d
ratio of 5 when "d" = body diameter of the finished grommet.
Rated Capacities based on pin diameter no smaller than 5 times
the body diameter.
Rated Capacities based on design factor of 5.
Horizontal sling angles of less than 30º shall not be used.
**See Choker Hitch Rated Capacity Adjustment.
All capacities in tons of 2,000 lbs.
All eye and fitting dimensions in inches.

*Rated Capacities Basket Hitch and vertical lift based on D/d
ratio of 5 when "d" = body diameter of the finished grommet.
Rated Capacities based on pin diameter no smaller than 5 times
the body diameter.
Rated Capacities based on design factor of 5.
Sling angles of less than 30º shall not be used.
**See Choker Hitch Rated Capacity Adjustment.
All capacities in tons of 2,000 lbs.
All eye and fitting dimensions in inches.